================================== START =======================================
'setup.exe' MSI Caller - Filerelease: 201.111.1701.1 - Copyright (C) S AG 2008
======= Timestamp logfile begin: 2007-01-03,  12:56:21
 LoggingLevel: 11
Path of .msi file: F:\sw\simnetpc\opc\setup\
 Test and install MSI:
    Found MSI folder: C:\WINDOWS\system32\
    MSI Version required: 3.1.4000.1823  /  MSI Version installed: 3.1.4001.5512
    DCOM verification.
    DCOM settings O.K.
 End of TestMSI.
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\CompSetup'
    Clientname from registry: SIMATIC NET PC SOFTWARE
    Lnge Clientname: 23
    Setup language from registry: B
 SetupLanguage chosen: 1033
 No transform necessary. Language: B
    Test for Mutex...   [12:56:21]
	No MSI active (no Mutex existing)
Stream out from: F:\sw\simnetpc\opc\setup\siemens opc.msi
Stream out to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
Stream out: Steuerdatei
Stream return: 0
OS type: WNT: WXP
OS edition: PED
Operating systems allowed due to ini: Win2000
    WXP found.
 Test and install ISScript:
    Yes. 1. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriver2.exe
    Yes. 2. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriverT.exe
    Yes. IS path from registry exists: C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriver2.exe: vers. required: 11.0.0.28844  / vers. installed: 11.0.0.28844
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriverT.exe: vers. required:  11.0.0.28844  / vers. installed: 11.0.0.28844
    ISscript 11 installed in correct version.
	D e i n s t a l l a t i o n
    Test for Mutex...   [12:56:22]
	No MSI active (no Mutex existing)
 
 Deinstall section:
    (Determine Mainkey: No HKClassesR key..)
    (Determine Mainkey: No HKCUser key..)
    Full release you want to install: V03.07.01.0_01.14.0.01
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
 
======= Timestamp before install execution: 2007-01-03,  12:56:22
	I n s t a l l a t i o n
    Test for Mutex...   [12:56:22]
	No MSI active (no Mutex existing)
 
 Install section:
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
    Component not (already and/or no longer) installed: Will install it...
    Client entry set:SIMATIC NET PC SOFTWARE
 Launch installation:  [12:56:22]
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [12:56:22]
    called line: C:\WINDOWS\system32\msiexec.exe /i "F:\sw\simnetpc\opc\setup\siemens opc.msi" /qb-! /L*V "C:\WINDOWS\SETUP\LOGFILES\OPC_LOG_MSI_INTERN.TXT"  ALLUSERS=1 ADS_CALLED_EXTERNAL=1
    maximum waiting time= 1 minutes


CA: _ExitIfStandAlone   [2007-01-03 12:56:25]
Ext: 1 - Nested:  - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      OPC_LOG.TXT
Install start: 1-3-2007, 12:56:26

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 12:56:26
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 12:56:26

CA: _StreamOutSteuerdatei  BEGIN  [12:56:26]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [12:56:26]

CA: Comp_Initialize  START 12:56:26
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIEMENS OPC
Internal name: OPC
Release: K03.07.01.00_01.14.00.01
Version: 3.7
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 12:56:26

CA: _ADS_SetDirs  BEGIN  [12:56:26]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [12:56:26]

CA: Comp_BeforeDataMove  START 12:56:31

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2000
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    read Global SharedPath from registy: C:\Siemens\Common
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

		No Deinstallation flag set!!	
CA: Comp_BeforeDataMove  END 12:56:31

CA: _ads_copyfiles  BEGIN 12:56:34


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 12:56:34

Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [12:56:34]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
CA: _ADS_WriteRegistryValues  END  [12:56:34]

CA: Comp_AfterDataMove  START 12:56:34




    Add Client:                     SIMATIC NET PC SOFTWARE
    Write Version:                  3.7
    Write Release:                  K03.07.01.00_01.14.00.01
    Display Name                    SIEMENS OPC
    Logfilename                     C:\WINDOWS\OPC_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           OPC
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\OPC_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 12:56:34

CA: IniC_DeleteIniFiles  START 12:56:34
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 12:56:34
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 12:56:34 ;;;;;;

End CreateProcess  return=0  [12:56:34] 

================================================================================
 MSI returncode = 0   (0 = OK)
 Appresult value= 1   (1 would be OK)
 SetupSucceeded Value= 1  (1 or 2 would be OK)
 Client entry set empty - compsetup finished.
 'setup.exe' finished.
======= Timestamp logfile end: 2007-01-03,  12:56:34
================================================================================
=================================== END ========================================
 
 


CA: _ExitIfStandAlone   [2007-01-03 13:36:16]
Ext:  - Nested:  - Deinst: 1
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      OPC_LOG.TXT
Install start: 1-3-2007, 13:36:16

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 13:36:16
    --- Deinstallation--- !
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 13:36:16

CA: _StreamOutSteuerdatei  BEGIN  [13:36:17]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [13:36:17]

CA: Comp_Initialize  START 13:36:17
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIEMENS OPC
Internal name: OPC
Release: K03.07.01.00_01.14.00.01
Version: 3.7
No 'version.ini' file read because of Deinstall.
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: 

    Change Setup Language?
    Wanted: D, actual:  B
CA: Comp_Initialize  END 13:36:17

CA: _ADS_SetDirs  BEGIN  [13:36:17]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [13:36:17]

CA: Comp_BeforeDataMoveUninstall  START 13:36:17
    
Uninstalling shared component...
    
    Property ADS_DEINST, read successfully: 1
    Property ADS_CALLED_NESTED, read successfully: 
    Now test Uninstall dependencies...

Main Path and Common Path determination:

Common directory
    read Global SharedPath from registy: C:\Siemens\Common
    Common Path exists: C:\Siemens\Common
    Common path not changed because already installed: D:\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR from Registry: 
    Property INSTALLDIR not changed because already installed: 
     
     
CA: Comp_BeforeDataMoveUninstall  END 13:36:17

Remove Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_UnRegisterFiles  BEGIN  [13:36:22]
UnRegisterFiles:
CA: _ADS_UnRegisterFiles  END  [13:36:22]

CA: _ADS_EraseDirs  BEGIN  [13:36:23]
CA: _ADS_EraseDirs  END  [13:36:23]

CA: _ads_copyfiles  BEGIN 13:36:23


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 13:36:23

CA: Comp_AfterDataMoveUninstall  START 13:36:23
??? I_WARNING: Problems deleting own key: Software\Siemens\Shared Tools\OPC
    
    Uninstall finished normally.
    
CA: Comp_AfterDataMoveUninstall  END 13:36:23

CA: IniC_DeleteIniFiles  START 13:36:24
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 13:36:24
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 13:36:24 ;;;;;;
================================== START =======================================
'setup.exe' MSI Caller - Filerelease: 201.111.1701.1 - Copyright (C) S AG 2008
======= Timestamp logfile begin: 2007-01-03,  14:51:10
 LoggingLevel: 11
Path of .msi file: F:\sw\simnetpc\opc\setup\
 Test and install MSI:
    Found MSI folder: C:\WINDOWS\system32\
    MSI Version required: 3.1.4000.1823  /  MSI Version installed: 3.1.4001.5512
    DCOM verification.
    DCOM settings O.K.
 End of TestMSI.
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\CompSetup'
    Clientname from registry: SIMATIC NET PC SOFTWARE
    Lnge Clientname: 23
    Setup language from registry: B
 SetupLanguage chosen: 1033
 No transform necessary. Language: B
    Test for Mutex...   [14:51:10]
	No MSI active (no Mutex existing)
Stream out from: F:\sw\simnetpc\opc\setup\siemens opc.msi
Stream out to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
Stream out: Steuerdatei
Stream return: 0
OS type: WNT: WXP
OS edition: PED
Operating systems allowed due to ini: Win2000
    WXP found.
 Test and install ISScript:
    Yes. 1. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriver2.exe
    Yes. 2. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriverT.exe
    Yes. IS path from registry exists: C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriver2.exe: vers. required: 11.0.0.28844  / vers. installed: 11.0.0.28844
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriverT.exe: vers. required:  11.0.0.28844  / vers. installed: 11.0.0.28844
    ISscript 11 installed in correct version.
	D e i n s t a l l a t i o n
    Test for Mutex...   [14:51:11]
	No MSI active (no Mutex existing)
 
 Deinstall section:
    (Determine Mainkey: No HKClassesR key..)
    (Determine Mainkey: No HKCUser key..)
    Full release you want to install: V03.07.01.0_01.14.0.01
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
 
======= Timestamp before install execution: 2007-01-03,  14:51:11
	I n s t a l l a t i o n
    Test for Mutex...   [14:51:11]
	No MSI active (no Mutex existing)
 
 Install section:
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
    Component not (already and/or no longer) installed: Will install it...
    Client entry set:SIMATIC NET PC SOFTWARE
 Launch installation:  [14:51:11]
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [14:51:11]
    called line: C:\WINDOWS\system32\msiexec.exe /i "F:\sw\simnetpc\opc\setup\siemens opc.msi" /qb-! /L*V "C:\WINDOWS\SETUP\LOGFILES\OPC_LOG_MSI_INTERN.TXT"  ALLUSERS=1 ADS_CALLED_EXTERNAL=1
    maximum waiting time= 1 minutes


CA: _ExitIfStandAlone   [2007-01-03 14:51:15]
Ext: 1 - Nested:  - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      OPC_LOG.TXT
Install start: 1-3-2007, 14:51:15

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 14:51:15
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 14:51:15

CA: _StreamOutSteuerdatei  BEGIN  [14:51:15]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [14:51:15]

CA: Comp_Initialize  START 14:51:15
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIEMENS OPC
Internal name: OPC
Release: K03.07.01.00_01.14.00.01
Version: 3.7
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 14:51:15

CA: _ADS_SetDirs  BEGIN  [14:51:15]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [14:51:15]

CA: Comp_BeforeDataMove  START 14:51:18

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2000
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    read Global SharedPath from registy: C:\Siemens\Common
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

		No Deinstallation flag set!!	
CA: Comp_BeforeDataMove  END 14:51:18

CA: _ads_copyfiles  BEGIN 14:51:21


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 14:51:21

Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [14:51:21]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
CA: _ADS_WriteRegistryValues  END  [14:51:21]

CA: Comp_AfterDataMove  START 14:51:21




    Add Client:                     SIMATIC NET PC SOFTWARE
    Write Version:                  3.7
    Write Release:                  K03.07.01.00_01.14.00.01
    Display Name                    SIEMENS OPC
    Logfilename                     C:\WINDOWS\OPC_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           OPC
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\OPC_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 14:51:21

CA: IniC_DeleteIniFiles  START 14:51:21
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 14:51:21
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC147DD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 14:51:21 ;;;;;;

End CreateProcess  return=0  [14:51:21] 

================================================================================
 MSI returncode = 0   (0 = OK)
 Appresult value= 1   (1 would be OK)
 SetupSucceeded Value= 1  (1 or 2 would be OK)
 Client entry set empty - compsetup finished.
 'setup.exe' finished.
======= Timestamp logfile end: 2007-01-03,  14:51:21
================================================================================
=================================== END ========================================
 
 
